PIC Tutorial - LED Board
LED Board
This
is the LED Board, a simple array of eight LED's connected to all pins of one
port. As well as being used for simple output tutorials, it can be used as
a debugging aid, by using it to display values at certain points in a
program. Although it's labelled as connecting to PortB, it can also be
connected to PortA if required.
 |
This
is the top side of the LED board, it's built on a piece of Veroboard
15 strips wide by 24 holes high, it consists simply of eight LED's,
eight resistors, and the connector. This board has only one wire
link, across the top side of the connector, to connect the ground
connection of the LED's. |
 |
The
bottom of the board, it has only seven track cuts, again they are
marked with blue circles. |